Sometimes, this consumes more electricity than leaving the lamp on and shortens its service life. However, this cannot tell as a general rule. An
This can have various causes, but most often, it is due to aging technology. Especially in old buildings, this problem is likely. Loose cables
Most common causes for LED lamp flickering: Inferior quality and components in very cheap LEDs. Unsuitable or defective transformer (often found when converting from
Let’s take a typical RGB LED strip with 14.4 watts per meter as an example. At 14.4W/m, 1.2 amps of current flow at 12
For low-voltage LED lamps, i.e., those with 12 V and 24 V, corresponding transformers are required, which convert 230 V mains voltage into the
The color change of LED lamps can be graduated or in a smooth transition. Most color change lamps can be conveniently controlled with remote
LEDs last up to 100,000 hours (average rated life); the actual life depends on the particular usage time. Example: 50,000 hours results in about
The color change of LED lamps can be graduated or in a smooth transition. Most color change lamps can be conveniently controlled with remote
A: If the LED strip you bought can be cut, the cut-off remainder cannot be used. If you need to reconnect LED strips after
For the connection, the quick connectors are the means of choice. For assembly, the front clamp of the quick connector is in need. Then
We can deliver the exact power supplies you need, smaller quantities are NOT a problem.
We will contact you within 1 working day; please pay attention to the email with the suffix “@1000powers.com”.
