en English

Waterproof LED strips

The strips are made of the printed circuit board (PCB) of flexible material. Once the essential elements (LEDs and resistors) are in place, a transparent silicone coating can be placed on the PCB so that moisture does not affect the LED lenses, soldering, and other elements mounted on the support strip.

The silicone coating allows the strip to withstand weathering better, but it is still not recommended to leave it exposed for a long time to the sun (UV radiation) or to submerge it in water at great depth. Entirely submersible strips are available with an IP68 rating. Outdoor LED strips usually have an IP65 protection rating.

Degrees of protection

Epoxy coating (Outdoor LED strips): They have a layer of epoxy resin coating the LEDs giving them complete protection against dust and some protection against water. They are suitable for most uses. They cannot be wetted or installed in excessively humid or corrosive environments but can eventually be cleaned with a cloth dampened with water (no cleaning products).

Silicone coated (submersible LED strips): These strips are continuously submersible in water, making them ideal for installation in swimming pools, aquariums, and fountains in approximately 1 to 2 meters depth. Waterproof LED strips have a slight disadvantage over standard indoor or outdoor LED strips. The disadvantage is that the silicone layer that covers them reduces their luminosity and durability.

Main uses

Swimming pools

Fish tanks

Fountains

Table centers

Car tires

We remind you that you can review our product catalog on our website and buy LED strips for outdoor, indoor, and LED lighting kits at the best price online.

kitchen with led strips

LED strips

These strip lights can be installed and removed quickly without damaging your cabinets or the finishes on walls and ceilings.

What you need:

Pencil

LED strip kit

Tape measure

Setup area

Establish where you want to set up the LED strips. Usually, these strips are best suited for lights under cupboards as well as ceilings. Nevertheless, they can likewise be set up on the sides of closets to light up an area between cabinets. For example, if your kitchen sink has a closet on both sides, you can mount the LED strip lights on the sides of these cupboards to add lights in this field.

Procedure correctly

You need to determine the locations where you wish to install the LED lights and keep in mind where the calls for electricity exist. If there are breaks where the LED lights will be installed, measuring will undoubtedly assist in establishing how many meters of strip you require to acquire.

Purchasing LED Strips

Purchase the necessary equipment, including power adapters, adapter connectors, controllers, and remote controls. You can buy these items separately online or in an all-inclusive kit, which is recommended to avoid incompatibilities in connections or different types of lighting.

Placing the LED strips

Place the LED strips in the areas you want to install them, hooking one strip to another as needed. Plug the last strip into the light adapter and plug it into the outlet. Check that all lights are working correctly, and disconnect. Draw a straight line with a ruler and pencil in the area you want to install the LED strip lights. This acts as a guide for installation with clips or by using the adhesive that many types of LED strip lighting have.

Attaching the LED strips

Install the clips on your cabinets according to the manufacturer’s instructions, using the instructable. The length of your LED lights will determine how you give the clips clearance. In most cases, the clips come with threaded screws that can be easily screwed into your cabinets with a screwdriver.

Test LED lighting

Adjust the LED strip lights and plug the strip plug into the outlet.

We remind you that you can Buy LED Strips and complete LED lighting kits at the best price and with shipping to your home on this site.

In this news article, we will talk about the new twist in the industry of cars using LED lighting.

LED lighting for cars

Approximately 4 years ago, a trendy German car brand announced that it would include the first headlights with LED technology in the equipment of its cars, which guarantee a LED lighting power of up to 6000°K, that is to say; the lighting is almost daylight.

We can mention that some models before the cars with 6000° LED lighting power had 24 LED’s in each headlight for the lights used during the day. Still, the LED lighting is now implemented in the flashing lights, low beam, and high beam for use at night. This translates to a total of 54 LEDs for all lighting functions of the new sports cars.

Until recently, halogen and xenon headlights were still being used, but little by tiny other American car brands have added LEDs because of all the advantages offered by this type of lighting.

Background

It is important to note that LED lighting was used only for brake lights in the rear of some cars.

In 2003, the German company Audi introduced its fog lights in the form of LED strips, and its “Nuvolari Quattro” model implemented the first headlights composed entirely of LEDs.

Benefits of LED lighting

The benefits of LED technology in cars start with low power consumption (only 50 watts for low beams and 6 watts for daytime running lights). Another advantage of this lighting technology is that LEDs have an average life of over 100,000 working hours, i.e., approximately 12 years of continuous use. In other words, due to the low power consumption and long life of LEDs, vehicle wiring is thinner and thinner, and the elements that generate electricity are smaller and smaller, resulting in considerable energy savings.

Another advantage of LED lighting is that in the event of a malfunction of any of them, it is not necessary to replace the entire headlamp, as is done with xenon headlamps; it is sufficient to replace only the LED that is damaged. LED technology produces white light, very similar to daylight, which translates into better vision and better adaptation to the night vision capacity of the driver’s eyes. Incandescent headlights (xenon and krypton) lose almost 90% of energy because the energy is transformed into heat, while an LED converts energy into light.

Finally, we must not forget the aesthetic advantage, since an LED strip gives a more modern touch to the car, unlike other types of headlights. We recommend you read our tips to decorate cars with LEDs.

We remind you that on our site, Strips led lighting we have for sale led lighting for your car.

In this news article, we will talk about the color temperature of LED lighting so that when choosing a color, you know if it is the one that best suits you concerning the temperature it emits.

Understanding color temperature

The color temperature of light is the predominance of any one of the light spectrum colors in white lights, changing from white to warmer tones such as amber or cooler tones such as blue.

Color temperature has little to do with the feeling of warmth from the light emitted by a light source. To talk about color temperature is about the reaction that occurs in the brain when you are in an environment illuminated by any hue. Color temperature is not 100% accurate as there are factors that can produce changes in lighting. Color temperature is measured only in Kelvin and applies only to white light.

If the LED Strips are any other color, such as green or red, you would not be able to measure their color temperature. Below we will give you the classification of shades and temperatures so that you know which LED strip to choose if you want a white color:

Warm white

White light with a dominant amber hue is known as warm light because the effect seen in lighting gives a warm feeling like a sunset. 

Cool White

The white light, whose dominant hue is blue, is known as cold light. This type of lighting in LED strips in a room, for example, gives the feeling of being in a place with a low temperature, i.e., very cold.

Neutral White

This lighting is not inclined to blue or amber and is neutral like the sun in the morning. Still, it should be noted that it is impossible to get a white without any predominance of another color; what we call neutral white or neutral light is real because it has a minimal inclination to the yellow color. However, the human eye is unable to distinguish it. This light is recommended for use in public spaces, work areas, and commercial lighting; it can also be used in bathrooms, kitchens, public rooms, and event halls. Its tone is neutral, improves productivity, and enhances the colors of objects.

Where to use each temperature

Now that you know the shades and color temperatures in lighting, you will have other considerations when buying LED strips. But we’ll give you some recommendations and suggestions of where you can use each of them.

Warm white: By offering lighting with the color of a candle or a sunset, this color promotes relaxed moods in our brain and invites us to rest. It is recommended to use this color in living rooms, cabins, or beach houses; it can also be used in restaurants and bars with an intimate and romantic atmosphere.

Warm white: most of the traditional lighting is this one, which is close to yellow tones, like that of the afternoon sun; this is ideal for rest and reading environments, to be used in homes or public places. It is a soothing shade of light. We recommend using this type of light in restaurants, cafeterias, children’s rooms, gardens, hotels, or public spaces such as corridors and receptions.

Cool white: this white light with a bluish hue, like the sun in the middle of the day, is recommended to illuminate work areas or offices where productivity is required and focus attention on one thing. An advantage of cool white light is its luminous efficiency since it achieves more sharpness and delivers more light per watt than warm light. It is recommended to use this LED lighting in showcases, libraries, public restrooms, and sports fields.

Facebook
Twitter
LinkedIn

Leave a Reply

Your email address will not be published. Required fields are marked *

seventeen + 13 =

Ask For A Quick Quote

We will contact you within 1 working day; please pay attention to the email with the suffix “@1000powers.com”