en English

Set the mood instantly with LED Flood Light

Transform your home’s exterior lighting with LED

Brighten up your outdoor space today

Create a custom ambiance with LED Flood Lights

Color-Changing LED Flood Lights for Exterior Home Lighting. This luxurious mansion has been given a striking new look with color-changing LED flood lights. Using our RGBW flood lights and controller, the customer created 4 different zones of vibrant lighting to enhance the exterior of their home. With a wide variety of unique color options to choose from, the possibilities are endless. This stunning home has become the envy of the neighborhood and is sure to make a lasting impression. If you want to create a similar effect with color-changing outdoor lighting, our friendly sales associates are ready to assist you. Give us a call today!

power supply for Outdoor Flood Light

AC/DC Power Supplies

Input Voltage 80-264 Vac
Power rating 60w-300w

power supply for security lights

24VDC power supplies

Input Voltage switch mode 110/220V output voltages 12V 24V Power Rating 60W-300W

power supply for solar powered security lights

Thin LRS power supplies

Input Voltage 80-264 Vac
Power rating 60W-400W

Why 1000POWERS

0 +
Monthly Capacity
Production Area
0 +
Product Models

SMT in production

Surface Mount Technology (SMT) is the method used to mount electrical components directly onto the surface of a PCB.

This is where through-hole components have the most advantage: they are mechanically stronger than most SMDs because their leads run through the board, allowing them to withstand environmental stress.

power supply smt
power supply wave soldering

Wave Solder Process

A Wave soldering process uses a wave of flux or solder to make connections. The waves are separated by a through-hole approximately half the board’s thickness. 

High-Quality Control for power supplies

We inspect all the semifinished power supplies for high-quality control. Determined by visuals, ensure all elements are in the right place.

power supply test

One Stop Solution for All Your Needs

As a power supply manufacturer, 1000powers is fully equipped, with an integrating sphere, constant temperature, and humidity box, pressure tester, and other product performance evaluation equipment. 

Here are some tips regarding LED flood lights

LED flood lights often come equipped with motion sensors, which detect movement in the yard at night and automatically power on the lights.

These lights typically have a built-in motion sensor that customizes when and how long the lights stay on.

If your outdoor porch light has a timer, giving you options of one, five, or 10 minutes for the light to stay on, choose a duration based on your specific needs and preferences.

LED fixtures and solar lights are commonly used in flood lights, providing energy-efficient options for outdoor lighting.

The brightness of flood light is determined by its lumen output. Higher lumens result in a brighter light. LED flood lights are known for their efficiency, making them a popular choice.

Please note that these are general tips, and it’s recommended to consult the specific product instructions and guidelines for optimal usage of your LED flood lights.

However, as a general guideline, here are some recommended ranges for different outdoor lighting applications:

Security lighting: A range of 700 to 1300 lumens is often sufficient for general security lighting. This can help deter potential intruders and provide adequate visibility in the area.

Landscape lighting: If you’re looking to highlight specific landscape features like trees, shrubs, or architectural elements, you may need around 50 to 300 lumens per fixture, depending on the size and desired intensity of the lighting.

Sports lighting: For sports fields or outdoor recreational areas, the lumen requirements can vary widely depending on the size and specific needs of the sport. Larger fields may require several thousand to tens of thousands of lumens.

Large outdoor areas: If you have a large outdoor space that requires general lighting, you might consider floodlights ranging from 2000 to 10,000 lumens or more, depending on the desired size and brightness level.




Here are some factors to consider when evaluating their effectiveness:

  1. Energy Efficiency: Solar-powered security lights use solar energy to charge their batteries during the day. This renewable energy source makes them environmentally friendly and cost-effective in the long run, as they don’t require electricity from the grid.

  2. Installation and Maintenance: Solar-powered security lights are generally easier to install since they don’t require wiring or access to an electrical outlet. However, ensuring that the solar panel receives adequate sunlight for efficient charging is essential. Regular maintenance, such as cleaning the solar panel and replacing the battery when necessary, is also important for optimal performance.

  3. Illumination and Sensor Range: The effectiveness of solar-powered security lights in providing illumination and detecting motion depends on factors such as the light fixture’s quality and the motion sensor’s range. Choosing lights with appropriate brightness levels and motion sensor capabilities that meet your security needs is essential.

  4. Sunlight Availability: The efficiency of solar-powered lights is directly linked to the amount of sunlight they receive. In areas with limited sunlight or during the winter months, the charging capacity may be reduced, affecting the overall performance of the lights.

  5. Placement and Coverage: Properly placing solar-powered security lights ensures optimal coverage and detection. Consider the specific areas you want to illuminate and whether the solar panel’s placement will receive sufficient sunlight to power the lights effectively.

Solar-powered security lights can be convenient and eco-friendly for illuminating and securing outdoor areas. However, it’s important to evaluate factors such as sunlight availability, product quality, and specific security requirements to determine their suitability for your particular situation.

Our customer created stunning pool grotto lighting using our RGB color-changing LED lights. The D1 RGB LED Step lights was perfect for this project due to their small size and ideal brightness for lighting the steps leading to the water slide feature at night. Additionally, two underwater RGB light fixtures were placed behind the waterfall to illuminate the falling water. To control the color of the lights, the customer opted for our 4 zone RGBW Controller and WiFi receivers. This allows them to change the lighting color in 4 different areas using their phone or handheld remote. The four-zone system also provides for using 12V and 24V products from the same controller using separate receivers. Overall, combining our color-changing LED lights and the pool grotto design creates a stunning visual effect that will impress guests.

A customer completed their houseboat renovation using RGB + Warm White LED Strip Lights, providing color-changing and warm white lighting. The strips were installed discreetly to create a beautiful, glowing effect without visible LEDs. The UX8 RGBW Controller provides color-changing functionality mounted on the wall, which allows the user to control both color and brightness of the warm white output. The customer was delighted with the project’s outcome, stating that it exceeded their expectations. If you’re considering adding color-changing lighting to your space, please get in touch with us for assistance with your project.

Customers can create an ideal light source to accent rooms and architectural features using LED strip lights and aluminum channels. In one customer’s project, LED Strip Lights are used for wall displays and behind a TV and fireplace feature. For instance, the strip lights are embedded directly into a ceiling mount channel with a frosted cover for the skateboard wall, diffusing the strip lights to produce a line of light effect that is more visually pleasing than visible diodes.

The shower lighting design features Daylight White LED Strip Lights and Aluminum Channels with covers to create a modern and custom linear lighting solution. Waterproof strip lights are inserted into the aluminum extrusion, and the frosted cover is sealed with silicone. This method allows for a wide range of custom linear lighting options that can be tailored to fit various shower areas, including ceilings, walls, niches, and even floors. If you are considering upgrading your shower or bathroom lighting, please get in touch with us; we will be happy to assist you.

Send Your Inquiry Today

Ask For A Quick Quote

We will contact you within 1 working day; please pay attention to the email with the suffix “@1000powers.com”