Downlight Lighting
LED downlights
LED Downlights are usually used in offices and business premises such as clothing stores. A distinctive feature of LED downlights is the way they are mounted (ceiling, spot) and the way the light is directed downwards. This gives the rooms a certain mood, makes them look more spacious and thus much more inviting.
Advantages of Recessed Downlights
Downlights lighting designers make recessed downlights in direct contact with insulation and suitable for use in dry, damp, and wet locations. They blend into your ceiling, and you can save by buying bundles of matching lights for the entire space.
The main suitable products include LCM/IDLC/ODLC/PLM/LPF/NPF series with 0-10V or DALI dimming functions.
LED Driver in Lighting Fixtures Application
LED Driver for ceilings Lighting
Application Place LED track light / LED bulb LED Spotlight / LED Bulb / LED Corn Light LED Strip Light / LED Tube Light / LED Table Lamp LED panel light / LED chandelier / living room lamp
LED Driver for ceilings Lighting
High frequency low resistance capacitor In theory, if the LED driver is used for 8 hours a day, it can be used for 3 years. If the LED driver uses a temperature below 70 ° C, it can even be as long as 5 years.
LED Driver for ceilings Lighting
High quality intelligent constant current Overvoltage protection, overload protection, overheat protection, short circuit protection
Why 1000powers
SMT in production
Surface Mount Technology (SMT) is the method used to mount electrical components directly onto the surface of a PCB.
This is where through-hole components have the most advantage: they are mechanically stronger than most SMDs because their leads run through the board, allowing them to withstand environmental stress.
Wave Solder Process
A Wave soldering process uses a wave of flux or solder to make connections. The waves are separated by a through-hole approximately half the board’s thickness.
High-Quality Control for power supplies
We inspect all the semifinished power supplies for high-quality control. Determined by visuals, ensure all elements are in the right place.
Choose Xinreal to Customize Your Lighting Design
As a power supply manufacturer, Xinreal is fully equipped, with an integrating sphere, constant temperature and humidity box, pressure tester, and other product performance evaluation equipment. All the power supplies are automated manufacturing. To be a good power supply supplier, we regard providing customers with high-quality, low-cost customized LED power supply, quality, and the delivery time as our aim.
Xinreal Production
Capabilities
- 200+ employees
- 2000+ Monthly Capacity
- 6,000 m² Production Area
- 12 years Development Experience
- 20+Experienced R&D Engineers
- 1,000+ Product Models
Latest Projects
- Outdoor Lighting
- Signage LED Lighting
- Exhibit LED Lighting
- Spot Lighting
- Street Lighting
LED Driver for the LED Spot Lighting Project
Slim Black LED power supply
100-240V AC / 175-240V AC
DC output 12V/24V/48V
Slim Strip, Small Size 60W-300W Waterproof Power Supply
Efficiency reached 91 %
Protection design:short-circuit, over-voltage, over-current, over-temp.
IP67 design, for Indoor and outdoor Installation
perfect solution for powering your devices indoors or outdoors
Plastic Small LED power supply
A variety of wattages (15w to 60w) to suit your needs and with output options of 12v and 24v.
It’s suitable for many different applications.
That’s slim, easy to install, and has protection against overloading. Our 100-240v input makes it perfect for use anywhere in the world. So why wait? Get our LED power supply today and enjoy all the benefits it has to offer!
Ultra Thin LED power supply
The power range is from 60W to 400W. Input 100-240V/110V/220V
The ultra-thin power supply is easy to install in small places, saving space. Made with aluminum casing material, it has good heat ability. With a built-in EMI filter, it has a tiny ripple rate. It is also 85% efficient with sufficient power. Plus, it undergoes a 4-hour burn-in test before shipping to ensure quality. And for your protection, it has OVP, OTP and Short circuit Protection programmed. Lastly, it is CE and ROHS certified. Get the LED Power Supply today!
New Arrival Plastic Power Supply, Power range from 35W to 300W
100-240V AC / 175-240V AC
DC output 12V/24V/48V
It is perfect for indoor installation. The slim strip design and small size, feature a protection design against short-circuits, over-voltage, and over-current. With an efficiency of 91%. A great choice for your indoor power needs.
FX Aluminum Rainproof LED Power supply
Power range from 60W to 600W. Input 100-240V/110V/220V
This easy-to-install power supply is perfect for a variety of applications, from residential to commercial. With its aluminum casing material and built-in EMI filter, it provides good heat ability and a tiny ripple rate, while it’s 85% high efficiency ensures sufficient power.
Plus, it comes with 4 hours of 100% full-load burn-in test and OVP, OTP, and Short circuit Protection programmed for your safety and peace of mind. CE and ROHS certified.
Waterproof Outdoor LED power supply
Power range from 20W to 300W. Input 100-240V/110V/220V
CLPS series is an ultra-thin and waterproof aluminum casing that is perfect for outdoor use. With a built-in EMI filter, for a tiny ripple rate. It is also 85% efficient with 4 hours of 100% full-load burn-in test. Plus, it has OVP, OTP, and Short circuit Protection programmed for your safety. Lastly, it is CE and ROHS certified. Don’t miss out on this amazing product!
One Stop Solution for All Your Needs
As a power supply manufacturer, Xinreal is fully equipped, with an integrating sphere, constant temperature and humidity box, pressure tester, and other product performance evaluation equipment.
Downlights Bathroom install Guide?
They are available in IP65 and fire-rated varieties, which means they are waterproof and can withstand moisture. And because they are water-resistant, they can last a long time. Unlike traditional bulbs, LED downlights are also energy efficient, with a 50,000-hour lifespan and IP65/65 rating. The LED downlights are also available in smaller sizes for even greater convenience.
We’ll also talk about IP rating, which is crucial for safety reasons. A good IP rating is essential because your lighting will protect against water and dust.
You’ll need to start planning your lighting scheme by identifying which areas in the bathroom require more light. A basic kitchen will require 400 to 800 lm, while a reading seat or shaving area will require less. Also, be sure to consider the purpose of the room before deciding how many downlights to install. Generally, one downlight per 1.2m2 will provide enough illumination for a bathroom. You should also consider the room’s use and décor before you select the number of downlights.
The basic difference between spotlights and downlights is their light source. Spotlights are generally used as accent lighting. Downlights are energy-saving lamps with white or yellow light. Spotlights are usually more decorative and come in various shapes and sizes. Although both types provide illumination, they serve different purposes. Spotlights are generally more energy efficient and often use a quartz bulb. Downlights are most commonly used in bedrooms and hallways.
On the other hand, spotlights are usually surface-mounted luminaires with a cutout. The typical cutout size is 2 inches, 2.5 inches, or three inches. A downlight needs to be recessed into a higher ceiling, while a spotlight requires a six to eight-inch cutout. Spotlights can be installed near flammable objects, while downlights must be mounted through holes.
A spotlight has a wide range of uses. In general, they can illuminate a room up to five square feet. While a spotlight is generally more powerful, downlights are less durable. Spotlights also require less maintenance and are more expensive. However, downlights are a good option for small rooms and a home office. The difference between spotlights and downlights is often negligible.
While downlights and spotlights are similar in size, they serve very different functions. Spotlights are typically surface-mounted, whereas downlights are fixed to the ceiling. Spotlights offer multiple light beams and are useful for special lighting requirements. Downlights are generally used for general lighting. Consider their differences before making your final decision if you’re planning to use spotlights.
